A bright call light indicates an incoming call to all daisy-chained Performer devices. The C3 is easy to configure and also features a call send button. Pushing on the A or B volume control toggles talk on/off with momentary/latching operation to the respective channel and includes talk LED indication. Two large rotary level controls on the top of the C3 adjust the listen volumes for CH-A and CH-B. It may work in other browsers but these are not officially supported. If you need help in selecting a PoE intercom, call IntercomsOnline at 88. They may even use 2-conductor wire or CAT-5 wire even though they don't use the Ethernet standard. The C3 has three XLR connectors, one for headset, one for signal input and one for signal loop through, which can also be used as an additional analog program input. Intercom is built and tested to work in the following desktop web browsers. There are intercoms that run power over the same wires so no additional cable is needed. You can use this model where ever wireless not possible Single wire Intercom connection Diagram. ![]() Now the system is ready for communication. Extensive DSP signal processing provides perfect sidetone-nulling and excellent intelligibility in applications with very high ambient noise levels. Then, place the intercom at its locations and connect the signal wires into the intercom, Insert the AC power cord in to the 90250-volt AC outlets. The beltpack uses high-quality digital audio for noise-free and hum-free signals. The Performer C3 is an ergonomically shaped, fully digital 2- channel beltpack that includes all the standard features from conventional analog partyline systems including daisy-chaining. The CR-4/CR-2 can be operated using a headset or the integrated powerful loudspeaker with a gooseneck microphone. Other features include individual listen volume controls for all partylines, Call and GPI, and a stage announce function to use the intercom microphone to talk over the PA system. The CR-4/CR-2 features an additional program input that can be mixed individually to each of the intercom channels. The remote mic-kill function allows the user to silence any open microphone on the intercom channels. The colour-illuminated buttons are ideal for applications in real-world environments. ![]() The clear user interface provides the user with ultimate performance and flexibility. ![]() Additional power supplies easily expand the possibilities. A retail home intercom system can cost anywhere from 150 to over 1000. Depending on the set-up the integrated power supply of the 19”/1RU device can power up to 32 Performer devices per line including beltpacks, split-boxes or desktop speaker stations. When people want to set up a home intercom system, they’ll go for an off-the-shelf solution. now the system is ready for communication. The Performer master stations CR-4 (4-channel) and CR-2 (2-channel) are the ideal choice for setting up a stand-alone digital partyline system. Just plug intercom into the 90240V ac outlet in the required places, and connect a wire between intercom.
0 Comments
Leave a Reply. |